Detection of Steel Corrosion in Bridge Decks and Reinforced Concrete Pavement, HR-156, 1977

(1977) Detection of Steel Corrosion in Bridge Decks and Reinforced Concrete Pavement, HR-156, 1977. Transportation, Department of

[img]
Preview
PDF
IADOT_hr156_Detection_Steel_Corrosion_Bridge_Decks_Concrete_Pavement_1977.pdf

File Size:1MB

Abstract

The Iowa Department of Transportation initiated this research to evaluate the reliability, benefit and application of the corrosion detection device. Through field testing prior to repair projects and inspection at the time of repair, the device was shown to be reliable. With the reliability established, twelve additional devices were purchased so that this evaluation procedure could be used routinely on all repair projects. The corrosion detection device was established as a means for determining concrete removal for repair. Removal of the concrete down to the top reinforcing steel is required for all areas exhibiting electrical potentials greater than 0.45 Volt. It was determined that the corrosion detection device was not applicable to membrane testing. The corrosion detection device has been used to evaluate corrosion of reinforcing steel in continuously reinforced concrete pavement.

Item Type: Departmental Report
Keywords: Concrete pavements, Corrosion tests, Maintenance, Reinforcing steel
Subjects: Transportation > Pavements
Transportation
Transportation > Research
Transportation > Data and Information Technology
Transportation > Maintenance and preservation
ID Code: 19629
Deposited By: Iowa DOT Library
Deposited On: 01 Jun 2015 15:05
Last Modified: 01 Jun 2015 15:05
URI: https://publications.iowa.gov/id/eprint/19629