Development of LRFD Procedures for Bridge Pile Foundations in Iowa Final Report, June 2010

(2010) Development of LRFD Procedures for Bridge Pile Foundations in Iowa Final Report, June 2010. Transportation, Department of

[img]
Preview
PDF
tr-573_lrfd_vol_1_w_cvr.pdf

Download (5MB)

Abstract

For well over 100 years, the Working Stress Design (WSD) approach has been the traditional basis for geotechnical design with regard to settlements or failure conditions. However, considerable effort has been put forth over the past couple of decades in relation to the adoption of the Load and Resistance Factor Design (LRFD) approach into geotechnical design. With the goal of producing engineered designs with consistent levels of reliability, the Federal Highway Administration (FHWA) issued a policy memorandum on June 28, 2000, requiring all new bridges initiated after October 1, 2007, to be designed according to the LRFD approach. Likewise, regionally calibrated LRFD resistance factors were permitted by the American Association of State Highway and Transportation Officials (AASHTO) to improve the economy of bridge foundation elements. Thus, projects TR-573, TR-583 and TR-584 were undertaken by a research team at Iowa State University’s Bridge Engineering Center with the goal of developing resistance factors for pile design using available pile static load test data. To accomplish this goal, the available data were first analyzed for reliability and then placed in a newly designed relational database management system termed PIle LOad Tests (PILOT), to which this first volume of the final report for project TR-573 is dedicated. PILOT is an amalgamated, electronic source of information consisting of both static and dynamic data for pile load tests conducted in the State of Iowa. The database, which includes historical data on pile load tests dating back to 1966, is intended for use in the establishment of LRFD resistance factors for design and construction control of driven pile foundations in Iowa. Although a considerable amount of geotechnical and pile load test data is available in literature as well as in various State Department of Transportation files, PILOT is one of the first regional databases to be exclusively used in the development of LRFD resistance factors for the design and construction control of driven pile foundations. Currently providing an electronically organized assimilation of geotechnical and pile load test data for 274 piles of various types (e.g., steel H-shaped, timber, pipe, Monotube, and concrete), PILOT (http://srg.cce.iastate.edu/lrfd/) is on par with such familiar national databases used in the calibration of LRFD resistance factors for pile foundations as the FHWA’s Deep Foundation Load Test Database. By narrowing geographical boundaries while maintaining a high number of pile load tests, PILOT exemplifies a model for effective regional LRFD calibration procedures.

Item Type: Newsletter
Keywords: bridge deep foundationsm electronic databasem Load and Resistance Factor Design (LRFD)—pile load tests
Subjects: Transportation > Research
Transportation > Bridges and tunnels
Transportation > Roads and highways
Transportation > Design and Construction
Transportation
ID Code: 13623
Deposited By: Margaret Barr
Deposited On: 22 Aug 2012 16:13
Last Modified: 22 Aug 2012 16:13
URI: http://publications.iowa.gov/id/eprint/13623

Actions (login required)

View Item View Item