An Evaluation of the Roto-Mill Profiler on Concrete Pavements in Iowa, MLR-76-1, 1976

(1976) An Evaluation of the Roto-Mill Profiler on Concrete Pavements in Iowa, MLR-76-1, 1976. Transportation, Department of

[img]
Preview
PDF
IADOT_mlr7601_Evaluation_Roto_Mill_Profiler_Concrete_Pavements_Iowa_1976.pdf

File Size:244kB

Abstract

A new machine, the ROTO-MILL Profiler, became available in early 1976. This machine, manufactured by CMI Corporation of Oklahoma City, Oklahoma provides pavement surface Scarification at a much higher production rate than was previously possible. Iowa had the opportunity to observe and evaluate this machine on two separate sections of primary portland cement concrete pavement in October, 1976. The marked improvement in the profile index and the skid resistance indicates this machine may be considered a viable method for improving rideability and skid resistance of a roadway that is otherwise reasonably sound.

Item Type: Departmental Report
Keywords: Concrete pavements, Pavement performance, Portland cement concrete, Profilometers, Riding qualities, Roads, Roughness, Scarifying, Skid resistance, Surfaces
Subjects: Transportation > Pavements
Transportation > Pavements > Concrete
Transportation
Transportation > Roads and highways
Transportation > Research
ID Code: 17131
Deposited By: Iowa DOT Library
Deposited On: 06 Jun 2014 17:48
Last Modified: 15 Jan 2015 12:41
URI: https://publications.iowa.gov/id/eprint/17131